DPF-ZH819 Intelligent Regeneration
Item No.: 244
Intelligent post-processing regeneration equipment is an intelligent and easy-to-operate DPF regeneration equipment, which is suitable for comprehensive removal of carbon deposits and particles in the post-processing DPF system of Euro VI passenger cars,
Description
Instruction
Intelligent post-processing regeneration equipment is an intelligent and easy-to-operate DPF regeneration equipment, which is suitable for comprehensive removal of carbon deposits and particles in the post-processing DPF system of Euro VI passenger cars, trucks, and heavy trucks. without cutting and disintegrating carbon deposits from the inside through precise high temperature Make the DPF truly non-destructive, restore the DPF system components to a good state, so as to achieve the purpose of regeneration!
Intelligent version of post-processing regeneration equipment:
Cut-free - (the carrier does not need to be decomposed to achieve non-destructive high-temperature regeneration)
Pollution-free (Combined with the water ion dust removal box, the exhaust heat and carbon ash can be cooled and collected)
Short time-(It only takes 4 minutes to raise the temperature from 0-600 degrees! The regeneration time of DPF is shortened to 30 minutes! The cooling time can be reduced from 600 degrees to 50 degrees in 3 minutes!)
Full function - (equipped with a data printer, real-time printing of pressure and temperature data, generating a test report)
The effect is good - (the regeneration process automatically turns on the high temperature and high pressure purge mode, the carbon deposit does not stay, and the carbon deposit is completely discharged through the explosion mode after the high temperature regeneration is completed!)
Specification
Model: DPF-ZH819
Operating temperature: 0-850 degrees is recommended (safer)
Total power: 20KW
Total equipment size: 3200*800*1420(mm)
Maximum wind pressure: 23KPa
Gas storage tank pressure: 1.25MPA (12.5 kg)
Host size: 1520*760*1300(mm)
Mobile table size: 860*600*380(mm)
Water ion dust removal box: 830*600*800(mm)
Power: 0.6KW
Water storage capacity: 40L
RELATED PRODUCTS
REVIEW