Hydraulic Pipe Bender
Item No.: 106
1)It is suit for common water pipe,wire pipe,carbon steel pipe,thick-wall conduit tube,bend the angle with 90º.
2)1/2"-2" can be shaped 90°one time,2 1/2"-4" can reach suitable radian which radian must remove pipe and bend pipe five times.
2)1/2"-2" can be shaped 90°one time,2 1/2"-4" can reach suitable radian which radian must remove pipe and bend pipe five times.
Description
Introduction
The pipe bender is suit for bending welding steel tube which has low pressure to deliver liquid in cold situation. It is also suit for bending common water pipe; carbon steel pipe and thick-wall conduit tube. It is not suit for bending the steel pipe with different diameter and colored metal pipe. The machine can be use in building, Petrol, mines and shipbuilding industry.
Working Method
ITEM NO:SWG-1
•Output:10T
•Stroke:170mm
•Bending range:1/4"-1"
•Thickness of pipe:1-3.5mm
•Outside Dia:Ø13mm-Ø34mm
•Mould Disposition:1/4",5/16",3/8",1/2",3/4",1"
ITEM NO:SWG-2
•Output:16T
•Stroke:240mm
•Bending range:1/2"-2"
•Thickness of pipe:2.75-4.5mm
•Outside Dia:Ø22mm-Ø60mm
•Mould Disposition:1/2",3/4",1",1 1/4",1 1/2",2"
ITEM NO:SWG-3
•Output:18T
•Stroke:320mm
•Bending range:1/2"-3"
•Thickness of pipe:2.75-4.5mm
•Outside Dia:Ø22mm-Ø89mm
•Mould Disposition:1/2",3/4",1",1 1/4",1 1/2",2",2 1/2",3"
ITEM NO:SWG-4
•Output:20T
•Stroke:415mm
•Bending range:1/2"-4"
•Thickness of pipe:2.75-6mm
•Outside Dia:Ø22mm-Ø108mm
•Mould Disposition:1/2",3/4",1",1 1/4",1 1/2",2",2 1/2",3",4"
Details
The pipe bender is suit for bending welding steel tube which has low pressure to deliver liquid in cold situation. It is also suit for bending common water pipe; carbon steel pipe and thick-wall conduit tube. It is not suit for bending the steel pipe with different diameter and colored metal pipe. The machine can be use in building, Petrol, mines and shipbuilding industry.
Working Method
- Turn the switch tightly with clockwise direction.
- Loosen the bolt.
- Add lubrication on mould and the pipe.
- Choosing corresponding mould base on size of pipe, set mould on the top of actuating rod. Then insert the rocker on nether molding board. Put the pipe, turn two rockers and make the groove point to the mould.
- Turn back the upper mounding board; shake the handle of pump to make the mould press the pipe, bending the pipe until the angle is shaped.
- After bending. Loosen the switch anti-clockwise. The actuating rod would be back automatically. Open the upper molding board, get out the pipe.
|
ITEM NO:SWG-1
•Output:10T
•Stroke:170mm
•Bending range:1/4"-1"
•Thickness of pipe:1-3.5mm
•Outside Dia:Ø13mm-Ø34mm
•Mould Disposition:1/4",5/16",3/8",1/2",3/4",1"
ITEM NO:SWG-2
•Output:16T
•Stroke:240mm
•Bending range:1/2"-2"
•Thickness of pipe:2.75-4.5mm
•Outside Dia:Ø22mm-Ø60mm
•Mould Disposition:1/2",3/4",1",1 1/4",1 1/2",2"
ITEM NO:SWG-3
•Output:18T
•Stroke:320mm
•Bending range:1/2"-3"
•Thickness of pipe:2.75-4.5mm
•Outside Dia:Ø22mm-Ø89mm
•Mould Disposition:1/2",3/4",1",1 1/4",1 1/2",2",2 1/2",3"
ITEM NO:SWG-4
•Output:20T
•Stroke:415mm
•Bending range:1/2"-4"
•Thickness of pipe:2.75-6mm
•Outside Dia:Ø22mm-Ø108mm
•Mould Disposition:1/2",3/4",1",1 1/4",1 1/2",2",2 1/2",3",4"
Details
RELATED PRODUCTS
REVIEW